Flanges & Butt weld fittings
Pipes, Tubes, Sheet, Round Bar, Flat Bar, Fastners etc. in stainless steel, Carbon steel & Alloy Steel
STAINLESS STEEL GRADES
202, 304, 304L,304H, 316, 316L, 316Ti, 317, 317L, 321, 310, 347,410, 420, 430, 431, 904L,
Titanium GR 2 & Gr 5, Monel, Inconel, Hastelloy, Nickel Alloys, Duplex and Super Duplex Stainless steel etc.
CARBON STEEL & ALLOY STEEL GRADES
A 53, ASTM A 106 GR B, A333 GR6, IS 2062, ASTM A 335 P11, P22, P91,
Pipes (NABL Approved TC can be provided)
Seamless - ½” NB to 12” NB in Sch 10 to Sch XXS
Welded - ½”NB to 20”NB in Sch-10 to Sch-80 (Welded Ratnamani Make)
Customized size can be arranged as per requirement.
Tubes (NABL Approved TC can be provided)
Seamless/welded 6mm OD to 101.6mm in thickness from 0.5mm thick to 10mm / Customized size also available as per your requirement.
Sheets, Plates, Coils, & Flats (Make Jindal or any Imported make available in stock)
Available as per your required sizes in above grades in various thickness ranging from 0.3mm thick to 100mm thick in various dimensions.
Rods and Bars (Make: Viraj, Mukund, Ambica, Mangalam)
Rods and Bars in shape of Round, Square, Rectangle and Hex available.
Sizes: 1mm to 200mm and above.
Pipe Fittings (Make Simplex Steel industries)
Butt weld fittings: ½” NB to 24” NB in forms of Elbows, Tees, Reducer, Cross, Nipple, Stub ends, dish ends, Caps, etc.
Forged Fittings: ½” NB to 3” NB, 3000# to 9000#, Elbow, Tee, Coupling, Swage nipple, caps.
Flanges (Make Simplex Steel industries)
Forged flanges, plate flanges & customized flanges in Sizes from ½” NB to 24” NB in Class 150, 300, 600, 900
and above 24” in Series ‘A’ and Series ‘B’.
Types: Slip on, Weld Neck, Blind/Blank, Socket weld, Flat face, Threaded, Lap Joint etc.
Fasteners (Make Simplex Steel Industries)
Nuts, bolts, washers, Studs, Stud bolts.
in all types of Stainless steels, Nickel and nickel alloys, Inconel, Monel, Hastelloy,
Copper-Nickel 90-10, Copper-Nickel 70-30, Alloy 20.
Exotic non-ferrous metals (NABL Approved TC can be provided)
Inconel (600, 625, 800, 825, 718 etc.), Monel (400, K-500), Hastelloy (C-276, C-22, B2 etc.),
Nickel alloys (Cu-Ni 70-30, Cu-Ni 90/10 etc.), Alloy 20, Titanium Class 1 to 5.
Leave a Reply ·
You must be logged in to post a comment.