Site logo
  • PL-ADMIN wrote a new post 2 years, 10 months ago

    To ensure that our suppliers are financially healthy we need to keep checking up some of the financial areas of the supplier.

    It’s essential to conduct financial assessments on selected suppliers that make u […]

  • PL-ADMIN wrote a new post 2 years, 10 months ago

    Low density polyethylene (LDPE).

    This clear or translucent plastic exhibits flexibility, chemical resistance, and waterproofing capabilities. It is used in the manufacture of a wide range of products, […]

  • PL-ADMIN wrote a new post 2 years, 10 months ago

    Forging is a metal shaping technique using compressive localized forces. commonly performed with the help of forging presses or hammering tools powered by either electricity, hydraulics or compressed air. Some o […]

  • PL-ADMIN wrote a new post 2 years, 10 months ago

    Cold chamber die casting is a preferred manufacturing process for metals that have high melting points like metal alloys of aluminium, brass and copper. Cold chamber machinery requires additional equipment — u […]

  • PL-ADMIN wrote a new post 2 years, 10 months ago

    9 Corrugated Box Testing Methods to Ensure Packaging Quality:

    Bursting Strength TestEdge Crush Test 2 SingleWater Resistance of the GluingCobb Sizing TesterPaper Grammage and ThicknessPuncture ResistanceScuff […]

  • PL-ADMIN wrote a new post 2 years, 10 months ago

    Pipes are normally used to transport gasses or liquids making it important to know the capacity. Knowing how much can flow through the pipe is key.

    Tubes are generally used in structural application and […]

  • PL-ADMIN wrote a new post 2 years, 10 months ago

    Bursting Strength

    The bursting strength of a material is termed as the strength of the material to resist any type of rupture force that is applied on the material from a uniform direction and can cause the […]

  • PL-ADMIN wrote a new post 2 years, 11 months ago

    1 Recognition of Need

    Needs Vs Wants

    2 Understanding / Development of Specification – Technical & Performance requirement / Quantity / Quality / Delivery / Packaging / Service / Budget

    3 Find Potential […]

  • PL-ADMIN wrote a new post 3 years ago

    C45 [EN8 / 1045] – medium carbon steel

    EN24 / ISO 683-18 34CrNiMo6 – high tensile alloy steel

    Wear resistance, used in gears, pinions, shafts, and spindles, Die casting and hot metal processing, such […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    The ability of a material to resist permanent indentation is known as hardness.

    Brinell Hardness Test

    During this test, an accurately controlled force is maintained when an indenter, generally a carbide […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    Checklist for evaluation of potential supplier –

    1. Competency: Capabilities assessment – measurement against our requirement.

    2. Capacity: Supplier’s available resources to meet our orders (staff, […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    A pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action, typically converted from electrical energy into Hydraulic energy. Pumps can be classified into three majo […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    How to select the correct contract type that is most suitable for our requirement? Selecting correct contact form for a specific purchase agreement depends on various factors like availability and accuracy of […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    Bronze is an alloy that consists primarily of copper with the addition of tin & sometime arsenic, phosphorus, aluminum, manganese, and silicon. All of these ingredients produce an alloy much harder than copper […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    There are more than 400 copper alloys, each with a unique combination of properties, to suit many applications, manufacturing processes and environments.

    Pure copper has the best electrical and thermal […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    Aluminum alloys – Aluminum (Al) + alloying elements like copper, magnesium, manganese, silicon, tin and zinc.

    There are mainly two type of Aluminum alloys, casting alloys and wrought alloys. They are further […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    There are two major numbering systems used by the steel industry, the first developed by the American Iron & Steel Institute (AISI), and the second by the Society of Automotive Engineers (SAE). Both of these s […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    Tool steels comprise carbide-forming elements such as chromium, vanadium, molybdenum and tungsten in different combinations. They also contain cobalt or nickel which improves their high-temperature performance. […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium (typically between 10-20%). Chromium produces a thin layer of oxide on the surface of the steel known as the ‘passive layer’. This prevents any […]

  • PL-ADMIN wrote a new post 3 years, 1 month ago

    Alloy steel is a steel that has had small amounts of one or more alloying elements (other than carbon) such as such as manganese, silicon, nickel, titanium, copper, chromium and aluminum added. This produces […]

  • Load More